|Item Name||Fall arrest protection safety nets|
|Material||High tenacity polypropylene|
|Mesh Size||60mm, 70mm, 90 mm, 100mm (Knotted)|
|Others||Custom nets and accessories are available.|
Falls are among the most common reasons for workplace injuries and fatalities in Construction site. Falls generally occur when employees are working at an elevated height and are not adequately protected. Some examples include employees working on elevated work surfaces, ladders, stairs, scaffolds, aerial devices, roofs, bridges, trusses, beams, purlins, plates, suspended staging, catwalks and walkways. Falls in construction frequently involve slippery, cluttered, or unstable walking/working surfaces, unprotected edges, floor holes or wall openings, unsafely positioned ladders, and misuse of fall protection devices.
Gravity’s not just a good idea, it’s the law! And remember, it’s not the fall that’s the problem. It’s the sudden stop. And just how suddenly do you stop?
Those of you who had high school physics may recall that the velocity (v) of a falling body may be calculated by the equation: v= *2gh, where (g) is the gravitational constant 32 ft/sec2 and (h) is the height of the fall in feet. So if you know how high you are, you can easily figure out how hard you’ll hit the ground.
For example, consider a measly 10-foot fall. Just before you hit the pavement, you’re moving at about 25 ft/sec (2 x 10ft x 32ft/sec2 = 640 ft2/sec2 = 25 ft/sec). That’s the same as 17 miles per hour. You can get some idea of the benefit of using fall protection when you think about what would happen to your car if it slammed into a brick wall at 17 miles an hour.
Fall arrest protection safety nets are designed to save lives and reduce injuries by catching and then absorbing the energy from a falling body and those working below from falling debris and tools. A personal fall-arrest system consists of a full body harness and associated hardware that slows a worker’s rate of descent and keeps him from hitting the ground.
Fall arrest safety protection safety nets Solutions at Huaxing is provided in the construction industry, to enable the worker to work safely and confidently at height. A Collective level of protection is provide to prevent any fatal or serious accident.
Huaxing Fall arrest protection safety nets are made from high strength Polyproplene Ropes which can withstand the required load. To minimize any impact related injury, the knotting of the Meshes is done in a special way to make it work as a shock absorber. Huaxing’s fall protection standard requires that anyone working at heights of 6 feet or more be provided with fall protection.